Aluminium Catamaran


TOUCHWATER Enduro

Sport catamaran with hydrofoils for funsport & speedsailing


Wave piercing sport catamaran with semi-displacement hulls


The TW Enduro shows its potential on inland sailing areas as well as coastal waters.


Optional hydrofoils

... increase your fun while speedsailing.


 

Individual hull size

Hull length can be chosen individually and shows best performance between 16 ft and 18 ft - depending on crew weight.


Adapted rig

Rig height is adapted correspondingly to moderate the tip momentum and make the boat balanced easily.

The jib is controlled via a two sheet system with 2:1 gear. That allows specific handling and trimming and supports safe tacking in the waves.


Two rig versions

The TW Enduro-fly is powered by a sail area optimized for boat size. That provides efficient drive for easy flying with a two person crew.

The TW Enduro-slimTop has a sail area reduced by about 10%. The main sail head has a slim design to improve the tip stability of the boat especially in stronger winds.
By this the TW Enduro-slimTop is a suitable single-hand boat, for lightweight crews, for cat sailing newcomers or for a two person crew in stronger winds.
And just change the main sail to get the TW Enduro-fly.

 

Pictures:
TW Enduro-fly 18 ft
Standard version without hydrofoils

... and easily without jib

 

TW Enduro hull platform
If you like to build the rig of your boat on your own, or the rig of your cat is in good order but the hull platform is damaged and shall be replaced, the individually adapted TOUCHWATER Enduro hull platform may be an option!

 

TW Enduro    Data

   
Sport catamaran for a 2 pers. crew
Length   individual 4.88 - 5.49 m
16 - 18 ft
Beam    individual 2.30 - 2.50 m
Draught   approx. 0.30 m
Mast length     adapted 7.60 - 8.50 m
Weight  ready to sail  approx. 150 - 160 kg
   
   
Main sail  (Enduro-fly) 13 - 15 m² (14 - 16 m² incl. mast area)
Main sail  (Enduro-slimTop) 11 - 13 m² (12 - 14 m² incl. mast area)
Jib 3.5 - 4 m²  
Fins 4  
Trapeze system 1 upgradeable for 2
Hulls, Fins, Hydrofoils Alu wave piercing hulls with semi-displacement characteristics,   optional hydrofoil system
Beams Alu  
Mast, Spreader Alu  
Rudder equipment Alu rudder blades swinging up in case of ground touching


Conformity:

The boat is constructed according to the requirements of the EU directive 2013/53/EU on recreational craft, and the applicable harmonized standards.


Contact

Immanuel Hahnenstein     Bernsteinstraße 12     D-31275 Lehrte

Phone   +49 (0)5175 7617

Sitemap Privacy Legal Notice